When heat cranks up, depend on aluminized steel sheet and coil products from Alliance Steel.
Aluminized steel is carbon steel coated with an aluminum-silicon alloy during a hot-dipped process, which creates a bright appearance and offers heat resistance at a competitive price.
Applications for Aluminized Steel Products
High-temperature, corrosion-resistant applications that do not require a high strength-to-weight ratio can benefit from aluminized steel. Products manufactured using aluminized steel include:
- Residential and Commercial Heating, Ventilation and Air-Conditioning Systems
- Household Appliances
- Engine Components
Aluminized Steel Sheet
Alliance Steel Multi-Blanking Capabilities:
Material Thickness: .015"-.135"
Max Coil: 45,000 lbs
ID: 20”-24”
Entry Width: 15.00”-74.00”
Exit Width: 5.00”-74.00”
Length: 6.00”-144”
Width/Length Tol: +/-.010"
Exit width: 4.00"-74.00”
Max coil weight: 50,000 lbs
Aluminized Steel Coil
Alliance Steel Slitting Capabilities:
Material Thickness: .010"-.500"
Min/Max Slit width: .375”-84”
Min/Max ID: 20”-30”
Max OD: 84”
Slit Width Tolerance: +/-.005"
Alliance Steel’s aluminized steel sheet and coil service capabilities include slitting, shearing, blanking, stretcher leveling, degreasing and brushing and metallurgical support.
For more information about aluminized steel sheet and coil products, contact Alliance Steel.
Structural Grades | C | Mn | P | S | Al | Si | Cu | Ni | Cr | Mo | V | Cb | Ti | N |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
30,33,36,40 | 0.25 | 0.9 | 0.035 | 0.04 | 0.2 | 0.2 | 0.15 | 0.06 | 0.008 | 0.008 | 0.025 | |||
36T2,45-80 | 0.25 | 1.35 | 0.035 | 0.04 | 0.2 | 0.2 | 0.15 | 0.06 | 0.008 | 0.008 | 0.025 | |||
45T2 | .02- 0.08 | .30- 1.0 | .03- .07 | 0.025 | .02- .08 | 0.6 | 0.2 | 0.2 | 0.15 | 0.06 | 0.008 | 0.008 | 0.025 | .01- .03 |
HSLA Grades | C | Mn | P | S | Al | Si | Cu | Ni | Cr | Mo | V | Cb | Ti | N |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
45C1 | 0.22 | 1.35 | 0.04 | 0.04 | 0.2 | 0.2 | 0.15 | 0.06 | 0.005 | 0.005 | 0.005 | |||
45C2 | 0.15 | 1.35 | 0.04 | 0.04 | 0.2 | 0.2 | 0.15 | 0.06 | 0.005 | 0.005 | 0.005 | |||
50C1 | 0.23 | 1.35 | 0.04 | 0.04 | 0.2 | 0.2 | 0.15 | 0.06 | 0.005 | 0.005 | 0.005 | |||
50C2 & 55C2 | 0.15 | 1.35 | 0.04 | 0.04 | 0.2 | 0.2 | 0.15 | 0.06 | 0.005 | 0.005 | 0.005 | |||
55C1 | 0.25 | 1.35 | 0.04 | 0.04 | 0.2 | 0.2 | 0.15 | 0.06 | 0.005 | 0.005 | 0.005 | |||
60C1 & 65C1 | 0.26 | 1.5 | 0.04 | 0.04 | 0.2 | 0.2 | 0.15 | 0.06 | 0.005 | 0.005 | 0.005 | |||
60C2 & 65C2 | 0.15 | 1.5 | 0.04 | 0.04 | 0.2 | 0.2 | 0.15 | 0.06 | 0.005 | 0.005 | 0.005 | |||
70C1 | 0.26 | 1.65 | 0.04 | 0.04 | 0.2 | 0.2 | 0.15 | 0.16 | 0.005 | 0.005 | 0.005 | |||
70C2 | 0.15 | 1.65 | 0.04 | 0.04 | 0.2 | 0.2 | 0.15 | 0.16 | 0.005 | 0.005 | 0.005 |
Common Grades | C | Mn | P | S | Al | Si | Cu | Ni | Cr | Mo | V | Cb | Ti | N |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CSA | 0.1 | 0.6 | 0.03 | 0.035 | 0.2 | 0.2 | 0.15 | 0.06 | 0.008 | 0.008 | 0.025 | |||
CSB | 0.02-.15 | 0.6 | 0.03 | 0.035 | 0.2 | 0.2 | 0.15 | 0.06 | 0.008 | 0.008 | 0.025 | |||
CSC | 0.08 | 0.6 | 0.1 | 0.035 | 0.2 | 0.2 | 0.15 | 0.06 | 0.008 | 0.008 | 0.025 | |||
BH | 0.012 | 1.5 | 0.12 | 0.03 | 0.2 | 0.2 | 0.15 | 0.06 | 0.008 | 0.008 | 0.025 | |||
FSA | 0.1 | 0.5 | 0.02 | 0.035 | 0.2 | 0.2 | 0.15 | 0.06 | 0.008 | 0.008 | 0.025 | |||
FSB | 0.02-.15 | 0.5 | 0.02 | 0.03 | 0.2 | 0.2 | 0.15 | 0.06 | 0.008 | 0.008 | 0.025 | |||
DDS | 0.06 | 0.5 | 0.02 | 0.025 | .01 | 0.2 | 0.2 | 0.15 | 0.06 | 0.008 | 0.008 | 0.025 | ||
EDDS | 0.02 | 0.4 | 0.02 | 0.02 | .01* | 0.2 | 0.2 | 0.15 | 0.06 | 0.1 | 0.1 | 0.15 |