Alliance Steel, LLC Adds to Slitting Arsenal

  • Home
  • /
  • Blog
  • /
  • Alliance Steel, LLC Adds to Slitting Arsenal

Paxson/Braner .250” x 24” narrow slitting line.

The steel service center adds additional slitting capabilities to complete trifecta. 

Gary, Indiana (November 17, 2021)-Earlier this month, Alliance Steel, LLC added an additional slitting line to its already impressive lineup of in-house slitters. The steel service center adds a Paxson/Braner .250” x 24” narrow slitting line to complete their trifecta. The addition of this line places Alliance Steel in a unique position to supply narrow slit coils with tight width tolerances. 

 

 

 

Drew Gross, Corporate Vice President, states, “It is important for Alliance Steel and our customer base to offer as many products and services as possible. Therefore, our team felt that it was necessary to add narrow coil slitting capacity to our already robust arsenal of equipment capabilities”. 

 

This precision slitting line, rebuilt in 2021, is equipped with a power-driven head, 16’ looping pit for camber–free material, and a tension stand for an exceptional quality product. 

 

Additional Capabilities:

· Material Type: HRPO, HR, CR, COATED

· Material Thickness: .020” - .250”

· Slit Width: .625” – 24.00”

· Min/Max ID: 20”

· Max OD: 60”

· Max Coil Weight on Entry: 15,000#

· Max Coil Weight on Exit: 10,000#

· Edge Trim: .187” each side

 

Precision Slitting creates opportunities for industries that require narrow cuts, such as multi-slide stamping, power generation, infrastructure, tubing, and many more.

 

Gross states, “With the ability to slit nearly half an inch in width, there are literally no industries we cannot service or provide for out of our state-of-the-art headquarters in Gary, Indiana.” 

 

Alliance Steel has decades of steel coil slitting experience and can offer products that meet or exceed industry standards on various gauges and grades. Alongside the 24” slitter, Alliance Steel has two additional slitting lines, including a heavy-gauge slitter (.500” x 84”) and a .010” x 72” coil slitter. 

 

Alliance Steel is a flat roll and coil processing - steel service center in Gary, Indiana. We have been a leader in flat-roll steel supply and coil processing for over 20 years. In May of 2020, we relocated to Gary, Indiana, strategically placing ourselves near significant highways, mills, and ports. There are also two sales locations in the Mid- South (Atlanta and Memphis).

Our temperature-controlled 300,000 square foot facility is equipped with full rail service, multiple slitters, including a heavy-gauge line, numerous fiber lasers, multi–blanking, cut to length, stretcher leveling, and metallurgical capabilities.

Alliance Steel is prepared to support your steel needs with an extensive inventory of flat-rolled sheet and coil products.

We maintain a selection of hot rolled steel, hot rolled pickled and oiled, hot rolled pickled dry, cold-rolled steel, motor lam, all coated products steel products. For more information, please call 219-427-5400 or submit a contact form.