Motor Lam Steel Sheet & Coil

Maximize useful electrical energy input with cold-rolled motor lamination steel sheet and coil from Alliance Steel.

Motor lamination steel is a specific cold rolled product tailored to create electromagnetic core materials for electrical equipment and components. Cold rolled steel has been rolled at room temperature, below its recrystallization temperature, which enables better control over finished product shape, thickness, dimensions and surface finish. While cold rolled and motor lamination steel manufacturing is similar, material composition and modifications to the annealing and tempering processes minimize energy loss from motor lamination products.

Alliance Steel’s cold rolled motor lamination sheet and coil service capabilities include slitting, shearing, blanking, leveling, degreasing and brushing, and metallurgical support.

Applications for Motor Lamination Steel Products

Motor lamination steel is often used to manufacture:

• Electrical Equipment and Components
• Small and Large Electric Motors
• Home Appliances
• Generators
• Transformers

Cold Rolled Motor Lamination Sheet

Alliance Steel Multi-Blanking Capabilities:

Material Thickness: .015"-.135"

Max Coil: 45,000 lbs

ID: 20”-24”

Entry Width: 15.00”-74.00”

Exit Width: 5.00”-74.00”

Length: 6.00”-144”

Width/Length Tol: +/-.010"

Exit width: 4.00"-74.00”

Max coil weight: 50,000 lbs

Cold Rolled Motor Lamination Coil

Alliance Steel Slitting Capabilities:

Material Thickness: .010"-.500"

Min/Max Slit width: .375”-84”

Min/Max ID: 20”-30”

Max OD: 84”

Slit Width Tolerance: +/-.005"

For more information about cold rolled motor lamination sheet and coil products and services, contact Alliance Steel.

Motor Lam Steel Grades & Properties

Structural Grades	C	Mn	P	S	Al	Si	Cu	Ni	Cr	Mo	V	Cb	Ti	N
30,33,36,40	0.25	0.9	0.035	0.04			0.2	0.2	0.15	0.06	0.008	0.008	0.025
36T2,45-80	0.25	1.35	0.035	0.04			0.2	0.2	0.15	0.06	0.008	0.008	0.025
45T2	.02- 0.08	.30- 1.0	.03- .07	0.025	.02- .08	0.6	0.2	0.2	0.15	0.06	0.008	0.008	0.025	.01- .03

HSLA Grades	C	Mn	P	S	Al	Si	Cu	Ni	Cr	Mo	V	Cb	Ti	N
45C1	0.22	1.35	0.04	0.04			0.2	0.2	0.15	0.06	0.005	0.005	0.005
45C2	0.15	1.35	0.04	0.04			0.2	0.2	0.15	0.06	0.005	0.005	0.005
50C1	0.23	1.35	0.04	0.04			0.2	0.2	0.15	0.06	0.005	0.005	0.005
50C2 & 55C2	0.15	1.35	0.04	0.04			0.2	0.2	0.15	0.06	0.005	0.005	0.005
55C1	0.25	1.35	0.04	0.04			0.2	0.2	0.15	0.06	0.005	0.005	0.005
60C1 & 65C1	0.26	1.5	0.04	0.04			0.2	0.2	0.15	0.06	0.005	0.005	0.005
60C2 & 65C2	0.15	1.5	0.04	0.04			0.2	0.2	0.15	0.06	0.005	0.005	0.005
70C1	0.26	1.65	0.04	0.04			0.2	0.2	0.15	0.16	0.005	0.005	0.005
70C2	0.15	1.65	0.04	0.04			0.2	0.2	0.15	0.16	0.005	0.005	0.005

Common Grades	C	Mn	P	S	Al	Si	Cu	Ni	Cr	Mo	V	Cb	Ti	N
CSA	0.1	0.6	0.03	0.035			0.2	0.2	0.15	0.06	0.008	0.008	0.025
CSB	0.02-.15	0.6	0.03	0.035			0.2	0.2	0.15	0.06	0.008	0.008	0.025
CSC	0.08	0.6	0.1	0.035			0.2	0.2	0.15	0.06	0.008	0.008	0.025
BH	0.012	1.5	0.12	0.03			0.2	0.2	0.15	0.06	0.008	0.008	0.025
FSA	0.1	0.5	0.02	0.035			0.2	0.2	0.15	0.06	0.008	0.008	0.025
FSB	0.02-.15	0.5	0.02	0.03			0.2	0.2	0.15	0.06	0.008	0.008	0.025
DDS	0.06	0.5	0.02	0.025	.01		0.2	0.2	0.15	0.06	0.008	0.008	0.025
EDDS	0.02	0.4	0.02	0.02	.01*		0.2	0.2	0.15	0.06	0.1	0.1	0.15